
FJ-C300 Series Waterborne Fluorocarbon Coatings
Introduction:
FJ-C300 series waterborne fluorocarbon coatings are a new type of environmen- tally-friendly fluorocarbon coating with super weathering resistance. They are confected from the acid and alkali resistant inorganic pigment and filling, metallic pigment, pearlescent pigment, auxiliary agent etc. by Shanghai Fuleda Fluoroca- rbon coating Fluorocarbon Material Co. Ltd., with taking super weathering resistance fluoro-resin emulsion as the base material.
Application Fields:
FJ-C300 series waterborne fluorocarbon coatings can be widely used in the painting dressing of outdoor structures which are used chronically without the necessity for maintenance, such as outdoor architectures (e.g. house, apartment, office building, factory, storehouse, express way, bridge, railway, and chimney), large-scale open installations (e.g. pipelines and stock tank of petroleum or chemical).
Performance:
■ High environmentally-friendly
There is no poisonous color in the coating. Its VOC value is near zero. It is odor free, harmless, environmentally-friendly.
■ Super weathering resistance
Outdoor sever life is more than twenty years.
■ Corrosion resistance to chemicals
This series coating has corrosion resistance to chemicals, such as acid, alkali and salt etc. and its solvent resistance is higher than most waterborne coating. It can be applied in the corrosion environment, such as the acid rain area, industrial polluted area and ocean climate area, without being damaged.
■ Stain resistant
Because of its high content of fluorine, the coating surface can not be stained easily and is convenient for cleaning. Its hydrophobic surface is anti-rainprint.
■ Fine ornamental
Just as the solvent-borne fluorocarbon coating,FJ-C300 waterborne fluorocarbon coating can be mixed into coating with various colors(e.g. solid color, metallic color, pearlescent color and special color etc.), and low, moderate gloss. Its color development is beyond that of solvent- borne coating.
■ Excellent construction performance
Spray coating, roller coating, and brush coating is allowed, but not sagging. Its excellent adhesion realizes its good and tight adherence on the majority of materials. For metallic lacquer, roller coating, brush coating can be adopted with nearly no floating phenomenon. The film is punky, cracking resistance. The film can form in low temperature and has large construction scope. So it can be applied easily.
■ Economical efficiency
It has the advantages of long service life, low maintenance cost, and high cost performance if applied in long-term.
Technological Parameters:
Name |
Top coat |
Finish coat |
Product No. |
FJ-C300 |
FJ-C300 |
Appearance |
Dispersion in various colors |
Sub-transparent dispersion |
Fineness |
≤40μm |
<20μm |
Solid content(Wt%) |
Metal ≥50% |
≥35% |
Solid ≥45% |
||
percentage of coverage(theory) |
16㎡/㎏on the condition of 20μm photopolymer |
22㎡/㎏on the condition of 12μm photopolymer |
Curing condition |
Temp. 10-35℃; Humidity≤85% |
Performance:
Performance and quality |
Testing method |
HG/T 4104-2009 waterborne fluorocarbon coating for construction |
FJ-C300 actual result |
State in container |
Even and without hard lump after stirring |
Even and without hard lump after stirring |
|
Low temperature stability |
GB/T 9755-2001 5.5 |
No deterioration |
No deterioration |
Drying time |
GB/T 1728-89 |
≤2h |
1h |
Contrast ratio |
GB/T 9755-2001 5.8 |
≥0.93 |
0.96 |
Adhesion |
GB/T 926-1998 |
≤1级 |
1 |
Water resistance |
GB/T 1733 |
No abnormity in 168 hours |
No abnormity in 168 hours |
Acid rain resistance |
GB/T 9274-1988immersion method |
No abnormity in 48 hours |
No abnormity in 48 hours |
Alkali resistance |
GB/T 9265 |
No abnormity in 168 hours |
No abnormity in 168 hours |
Laundering durability |
GB/T 9266 |
≥3000 times |
≥5000 times |
Stain resistance(%) white or light color |
GB/T 9780 |
≤15 |
8 |
Artificial climate resistance and ageing resistance |
Xenon lamp accelerates ageing |
3000h White and light color: 3000h Discoloration≤level 2 Chalking≤level 1 |
Construction Notice:
Painting method: Spray coating, roller coating, andbrush coatin
Dilute:By using <10% water
Time interval of painting: Minimum 2 hours
Preceding requirement: Be sure that there is no floating dust and oil stain in base material whose moisture content<10%, and PH<10. It is better to precoat the close base coat
Construction environment: Temp. is not less than 5℃; Humidity is not more than 85%.
Packing and storage: 20L/barral, keep it hermetically in cool and dry place. Storage time of plain colored or finishing coating is 12 months, and of metallic paint coating is 6 months.
Packing and Supply:
Package:
Base coat, top coat, finish coat |
20㎏/barrel |
Thinner |
16㎏/barrel |
Supply:
The order quantity for primer, finishing paint, thinner and top coat of Fuleda color chart is not specified. The minimum monochromic supply for top coat ordered based on other companies sample is 20kg, and the delivery time is 2-5 days (without time of transportation)
推荐产品